Carbon dioxide

2007 Schools Wikipedia Selection. Related subjects: Chemical compounds

Carbonwawawadin mamma din mamma din mamma din mamma mother		dioxide
Other names	Carbonic acid gas, Carbonic anhydride, dry ice (solid)
Molecular formula	CO2
Molar mass	44.0095(14) g/mol
Solid state	Dry ice, carbonia
Appearance	colorless gas
CAS number	[124-38-9]
Properties
Density and phase	1600 kg/m³, solid 1.98 kg/m³, gas at 298 K
Solubility in water	1.45 kg/m³
Latent heat of sublimation	25.13 kJ/mol
Melting point	−57 °C (216 K), pressurized
Boiling point	−78 °C (195 K), sublimes
Acidity (pKa)	6.35 and 10.33
Viscosity	0.07 c P at −78 °C
Structure
Molecular shape	linear
Crystal structure	quartz-like
Dipole moment	zero
Hazards
MSDS	External MSDS
Main hazards	asphyxiant, irritant
NFPA 704	0 0 0   (liquid)
R-phrases	R: As, Fb
S-phrases	S9, S23, S36 (liquid)
RTECS number	FF6400000
Supplementary data page
Structure & properties	n, εr, etc.
Spectral data	UV, IR, NMR, MS
Related compounds
Related oxides	carbon monoxide carbon suboxide dicarbon monoxide carbon trioxide
Except where noted otherwise, data are given for materials in their standard state (at 25 °C, 100 kPa) Infobox disclaimer and references

Carbon dioxide is a chemical compound composed of one carbon and two oxygen atoms. It is often referred to by its formula CO₂. It is present in the Earth's atmosphere at a low concentration and acts as a greenhouse gas. In its solid state, it is called dry ice. It is a major component of the carbon cycle.

Origins of CO2

Atmospheric carbon dioxide derives from multiple natural sources including volcanic outgassing, the combustion of organic matter, and the respiration processes of living aerobic organisms; man-made sources of carbon dioxide come mainly from the burning of various fossil fuels for power generation and transport use. It is also produced by various microorganisms from fermentation and cellular respiration. Plants convert carbon dioxide to oxygen during a process called photosynthesis, using both the carbon and the oxygen to construct carbohydrates. In addition, plants also release oxygen to the atmosphere, which is subsequently used for respiration by heterotrophic organisms, forming a cycle.

Chemical and physical properties

Carbon dioxide is a colorless gas which, when inhaled at high concentrations (a dangerous activity because of the associated asphyxiation risk), produces a sour taste in the mouth and a stinging sensation in the nose and throat. These effects result from the gas dissolving in the mucous membranes and saliva, forming a weak solution of carbonic acid. You may notice this sensation if you attempt to stifle a burp after drinking a carbonated beverage.

Its density at 25 °C is 1.98 kg m^-3, about 1.65 times that of air. The carbon dioxide molecule (O=C=O) contains two double bonds and has a linear shape. It has no electrical dipole. As it is fully oxidized, it is not very reactive and, in particular, not flammable.

At temperatures below −78 °C, carbon dioxide changes directly from a gas to a white solid called dry ice through a process called deposition. Liquid carbon dioxide forms only at pressures above 5.1 atm; at atmospheric pressure, it passes directly between the solid phase and the gaseous phase in a process called sublimation.

Carbon dioxide is soluble in water, in which it spontaneously interconverts between CO₂ and H₂CO₃ ( carbonic acid). The relative concentrations of CO₂, H₂CO₃, and the deprotonated forms HCO₃^- ( bicarbonate) and CO₃^2-( carbonate) depend on pH. In neutral or slightly alkaline water (pH > 6.5), the bicarbonate form predominates (>50%) becoming the most prevalent (>95%) at the pH of seawater, while in very alkaline water (pH > 10.4) the predominant (>50%) form is carbonate. The bicarbonate and carbonate forms are very soluble, such that air-equilibrated ocean water (mildly alkaline with typical pH = 8.2-8.5) contains about 120 mg of bicarbonate per liter.

Uses

General

Carbon dioxide is used to produce carbonated soft drinks and soda water. Traditionally, the carbonation in beer and sparkling wine comes about through natural fermentation, but some manufacturers carbonate these drinks artificially. A candy called Pop Rocks is pressurized with carbon dioxide gas at about 40 bar (600 psi). When placed in the mouth, it dissolves (just like other hard candy) and releases the gas bubbles with an audible "pop."

Leavening agents produce carbon dioxide to cause dough to rise. Baker's yeast produces carbon dioxide by fermentation within the dough, while chemical leaveners such as baking powder and baking soda release carbon dioxide when heated or if exposed to acids.

A carbon dioxide laser.

Carbon dioxide is often used as an inexpensive, nonflammable pressurized gas. Life jackets often contain canisters of pressured carbon dioxide for quick inflation. Steel capsules are also sold as supplies of compressed gas for airguns, paintball markers, for inflating bicycle tires, and for making seltzer. Rapid vaporization of liquid CO₂ is used for blasting in coal mines.

Carbon dioxide is the most commonly used compressed gas for pneumatic systems in combat robots. Carbon dioxide is ideal for this application because at room temperature it becomes a liquid at a pressure of 60 bar. A tank of liquid carbon dioxide provides a constant 60 bar pressure until the tank is close to being empty. A tank of compressed air would gradually reduce in pressure as it was used.

Carbon dioxide extinguishes flames, and some fire extinguishers, especially those designed for electrical fires, contain liquid carbon dioxide under pressure. Carbon dioxide also finds use as an atmosphere for welding, although in the welding arc, it reacts to oxidize most metals. Use in the automotive industry is common despite significant evidence that welds made in carbon dioxide are brittler than those made in more inert atmospheres, and that such weld joints deteriorate over time because of the formation of carbonic acid. It is used as a welding gas primarily because it is much less expensive than more inert gases such as argon or helium.

Liquid carbon dioxide is a good solvent for many organic compounds, and is used to remove caffeine from coffee. First, the green coffee beans are soaked in water. The beans are placed in the top of a column seventy feet (21 meters) high. The carbon dioxide fluid at about 93 degrees Celsius enters at the bottom of the column. The caffeine diffuses out of the beans and into the carbon dioxide.

Carbon dioxide has begun to attract attention in the pharmaceutical and other chemical processing industries as a less toxic alternative to more traditional solvents such as organochlorides. It's used by some dry cleaners for this reason. (See green chemistry.)

Plants require carbon dioxide to conduct photosynthesis, and greenhouses may enrich their atmospheres with additional CO₂ to boost plant growth. It has been proposed that carbon dioxide from power generation be bubbled into ponds to grow algae that could then be converted into biodiesel fuel . High levels of carbon dioxide in the atmosphere effectively exterminate many pests. Greenhouses will raise the level of CO₂ to 10,000 ppm (1%) for several hours to eliminate pests such as whiteflies, spider mites, and others.

In medicine, up to 5% carbon dioxide is added to pure oxygen for stimulation of breathing after apnea and to stabilize the O₂/CO₂ balance in blood.

A common type of industrial gas laser, the carbon dioxide laser, uses carbon dioxide as a medium.

Carbon dioxide can also be combined with limonene from orange peels or other epoxides to create polymers and plastics.

Carbon dioxide is commonly injected into or adjacent to producing oil wells. It will act as both a pressurizing agent and, when dissolved into the underground crude oil, will significantly reduce its viscosity, enabling the oil to flow more rapidly through the earth to the removal well. In mature oil fields, extensive pipe networks are used to carry the carbon dioxide to the injection points.

Refrigerant

Liquid and solid carbon dioxide are important refrigerants, especially in the food industry, where they are employed during the transportation and storage of ice cream and other frozen foods. Solid carbon dioxide is called "dry ice" and is used for small shipments where refrigeration equipment is not practical.

Liquid carbon dioxide was used as a refrigerant prior to the discovery of R-12 and may be enjoying something of a renaissance due to environmental concerns. Its physical properties are not favorable, having a low critical temperature of 88°F/31°C (the maximum temperature at which it will condense from gas to liquid) and high critical pressure of 1070 psi (the pressure required for phase change at the critical temperature). These properties necessitate the use of very strong refrigeration plumbing to contain the operating pressure of ~1400 psi, in contrast to pressures of ~300 psi for R-134a systems. Although carbon dioxide is non-inflammable and non-toxic it is an asphyxiant, which raises safety concerns in the case of leaks in enclosed spaces or system rupture in the case of vehicle accident. Despite these issues Coca-Cola has fielded CO₂-based beverage coolers and the US Army and others have expressed interest .

Solid CO₂

Dry ice

Dry ice is a genericized trademark for solid ("frozen") carbon dioxide. The term was coined in 1925 by Prest Air Devices, founded in Long Island City, New York in 1923. The name refers to the fact that under normal atmospheric pressure, solid CO₂ sublimates, or changes directly into a gas without passing through a "wet" liquid phase. As a general rule, dry ice will sublimate at a rate of five to ten pounds every 24 hours in a typical ice chest.

Dry ice is produced by compressing carbon dioxide gas to a liquid form, removing the heat produced by the compression (see Charles's law), and then letting the liquid carbon dioxide expand quickly. This expansion causes a drop in temperature so that some of the CO₂ freezes into "snow", which is then compressed into pellets or blocks. The freezing point of CO₂ is -109.3°F or -78.5°C.

Dry ice has many industrial uses, including

Dry ice used to cool drinks in Central Park.
(New York City, New York, U.S.)

• Cooling foodstuffs, biological samples, and other perishable items, particularly for shipment.
• Producing "dry ice fog" for special effects. When dry ice is put into contact with water, the frozen carbon dioxide sublimates into a mixture of cold carbon dioxide gas and cold humid air. This causes condensation and the formation of fog (see: fog machine). The use of warm water speeds up sublimation and leads to more vigorous production of fog.
• Tiny pellets of dry ice ( instead of sand) are shot at a surface to be cleaned. Dry ice is not as hard as sand, but it speeds processing by sublimating to a gas and does not produce nearly as much lung-damaging dust.
• Increasing precipitation from existing clouds or decreasing cloud thickness by cloud seeding.
• Producing carbon dioxide gas as needed in such systems as the fuel tank inerting system in the B-47 aircraft.
• Brass or other metallic bushings are buried in dry ice to shrink them so they will fit inside a machined hole. When the bushing warms back up, it expands and makes an extremely tight fit.
• As a cooling supplement for overclocking a central processing unit, a graphics processing unit, or other types of computer hardware.
• A rudimentary cloud chamber can be built using dry ice to supercool alcohol vapor.

Dry ice requires special precautions when handling. It is extremely cold, requiring proper insulating gloves to handle. It constantly produces carbon dioxide gas, so it cannot be stored in a light duty sealed container as the pressure buildup will quickly cause the container to explode (see dry ice bomb). The sublimated gas must be ventilated; otherwise, it may fill the enclosed space and create a suffocation hazard. Special care for ventilating vehicles is needed as well because of the small space. People who handle dry ice should also be aware that carbon dioxide is heavier than air and will sink to the floor. Some markets require those purchasing dry ice to be of 18 years of age or older.

Solid amorphous CO₂

In June 2006, an Italian-French science team announced the synthetic production of solid amorphous CO₂ glass. This form of glass, called carbonia, was produced by supercooling heated CO₂ at extreme pressure (40–48 GPa or about 400,000 atmospheres) in a diamond anvil. This discovery confirmed the theory that carbon dioxide could exist in a glass state similar to other members of its elemental family, like silicon ( silica glass) and germanium. Unlike silica and germanium oxide glasses, however, carbonia glass is not stable at normal pressures and reverts back to gas when pressure is released.

Biology

Carbon dioxide is an end product in organisms that obtain energy from breaking down sugars or fats with oxygen as part of their metabolism, in a process known as cellular respiration. This includes all plants, animals, many fungi and some bacteria. In higher animals, the carbon dioxide travels in the blood from the body's tissues to the lungs where it is exhaled. In plants using photosynthesis, carbon dioxide is absorbed from the atmosphere.

Carbon dioxide content in fresh air varies and is between 0.03% (300 ppm) to 0.06% (600 ppm), depending on location and in exhaled air approximately 4.5%. When inhaled in high concentrations (greater than 5% by volume), it is immediately dangerous to the life and health of plants, humans and other animals. The current threshold limit value (TLV) or maximum level that is considered safe for healthy adults for an 8-hour work day is 0.5% (5000 ppm). The maximum safe level for infants, children, the elderly and individuals with cardio-pulmonary health issues would be significantly less. Acute carbon dioxide toxicity is sometimes known as choke damp, an old mining industry term, and was the cause of death at Lake Nyos in Cameroon, where an upwelling of CO₂-laden lake water in 1986 covered a wide area in a blanket of the gas, killing nearly 2000. The lowering of carbon dioxide in the atmosphere is largely due to absorption by plants, which convert it to sugars through photosynthesis. Phytoplankton photosynthesis absorbs dissolved CO₂ in the upper ocean and thereby promotes the absorption of CO₂ from the atmosphere (Falkowski P. Scholes RJ. Boyle E. Canadell J. Canfield D. Elser J. Gruber N. Hibbard K. Hogberg P. Linder S. Mackenzie FT. Moore B 3rd. Pedersen T. Rosenthal Y. Seitzinger S. Smetacek V. Steffen W. The global carbon cycle: a test of our knowledge of earth as a system. [Review] [65 refs] [Journal Article. Review] Science. 290(5490):291-6, 2000.

Hemoglobin, the main oxygen-carrying molecule in red blood cells, can carry both oxygen and carbon dioxide, although in quite different ways. The decreased binding to oxygen in the blood due to increased carbon dioxide levels is known as the Haldane Effect, and is important in the transport of carbon dioxide from the tissues to the lungs. Conversely, a rise in the partial pressure of CO₂ or a lower pH will cause offloading of oxygen from hemoglobin. This is known as the Bohr Effect.

According to a study by the USDA, an average person's respiration generates approximately 450 liters (roughly 900 grams) of carbon dioxide per day.

CO₂ is carried in blood in three different ways. Most of it (about 80%–90%) is converted to bicarbonate ions HCO₃⁻ by the enzyme carbonic anhydrase in the red blood cells. 5%–10% is dissolved in the plasma and 5%–10% is bound to hemoglobin as carbamino compounds. The exact percentages vary depending whether it is arterial or venous blood.

The CO₂ bound to hemoglobin does not bind to the same site as oxygen; rather it combines with the N-terminal groups on the four globin chains. However, because of allosteric effects on the hemoglobin molecule, the binding of CO₂ does decrease the amount of oxygen that is bound for a given partial pressure of oxygen.

Carbon dioxide may be one of the mediators of local autoregulation of blood supply. If it is high, the capillaries expand to allow a greater blood flow to that tissue.

Bicarbonate ions are crucial for regulating blood pH. As breathing rate influences the level of CO₂ in blood, too slow or shallow breathing causes respiratory acidosis, while too rapid breathing, hyperventilation, leads to respiratory alkalosis.

It is interesting to note that although it is oxygen that the body requires for metabolism, it is not low oxygen levels that stimulate breathing, but is instead higher carbon dioxide levels. As a result, breathing low-pressure air or a gas mixture with no oxygen at all (e.g., pure nitrogen) leads to loss of consciousness without subjective breathing problems. This is especially perilous for high-altitude fighter pilots, and is also the reason why the instructions in commercial airplanes for case of loss of cabin pressure stress that one should apply the oxygen mask to oneself before helping others—otherwise one risks going unconscious without being aware of the imminent peril.

Plants remove carbon dioxide from the atmosphere by photosynthesis, which uses light energy to produce organic plant materials by combining carbon dioxide and water. This releases free oxygen gas. Sometimes carbon dioxide gas is pumped into greenhouses to promote plant growth. Plants can potentially grow up to twice as fast in conditions where extra CO₂ is available, although there is no additional benefit at concentrations beyond 1200 ppm. Plants also emit CO₂ during respiration, but on balance they are net sinks of CO₂.

Carbon dioxide is a surrogate for indoor pollutants that may cause occupants to grow drowsy, get headaches, or function at lower activity levels. To eliminate most Indoor Air Quality complaints, total indoor carbon dioxide must be reduced to below 600 ppm. NIOSH considers that indoor air concentrations of carbon dioxide that exceed 1000 ppm are a marker suggesting inadequate ventilation (1,000 ppm equals 0.1%). ASHRAE recommends that CO₂ levels not exceed 1000 ppm inside a space. OSHA limits carbon dioxide concentration in the workplace to 0.5% for prolonged periods. The U.S. National Institute for Occupational Safety and Health limits brief exposures (up to ten minutes) to 3% and considers concentrations exceeding 4% as " immediately dangerous to life and health." People who breathe 5% carbon dioxide for more than half an hour show signs of acute hypercapnia, while breathing 7%–10% carbon dioxide can produce unconsciousness in only a few minutes. Carbon dioxide, either as a gas or as dry ice, should be handled only in well-ventilated areas.

Concentrations of CO₂ in atmosphere

Atmospheric CO₂ concentrations measured at Mauna Loa Observatory.

As of 2006, the earth's atmosphere is about 0.038% by volume (381 µL/L or ppmv) or 0.057% by weight CO₂. This represents about 2.97 × 10¹² tonnes of CO₂. Because of the greater land area, and therefore greater plant life, in the northern hemisphere as compared to the southern hemisphere, there is an annual fluctuation of about 5 µL/L, peaking in May and reaching a minimum in October at the end of the northern hemisphere growing season, when the quantity of biomass on the planet is greatest.

The latest data, as of March 2006, shows CO₂ levels now stand at 381 parts per million (ppm) — 100ppm above the pre-industrial average.

Despite its small concentration, CO₂ is a very important component of Earth's atmosphere, because it absorbs infrared radiation at wavelengths of 4.26 µm (asymmetric stretching vibrational mode) and 14.99 µm (bending vibrational mode) and enhances the greenhouse effect.

The three vibrational modes of carbon dioxide: (a) symmetric, (b) asymmetric stretching; (c) bending. In (a), there is no change in dipole moment, thus interaction with photons is impossible, while in (b) and (c) there is optical activity.

The initial carbon dioxide in the atmosphere of the young Earth was produced by volcanic activity; this was essential for a warm and stable climate conducive to life. Volcanic activity now releases about 130 to 230 teragrams (145 million to 255 million short tons) of carbon dioxide each year. Volcanic releases are about 1% of the amount which is released by human activities.

Global fossil carbon emissions 1800–2000.

Since the start of the Industrial Revolution, the atmospheric CO₂ concentration has increased by approximately 110 µL/L or about 40%, most of it released since 1945. Monthly measurements taken at Mauna Loa since 1958 show an increase from 316 µL/L in that year to 376 µL/L in 2003, an overall increase of 60 µL/L during the 44-year history of the measurements. Burning fossil fuels such as coal and petroleum is the leading cause of increased man-made CO₂; deforestation is the second major cause. Around 24,000 million tonnes of CO₂ are released per year worldwide, equivalent to about 6500 million tonnes of carbon. (See List of countries by carbon dioxide emissions.)

Smoke and ozone pollution from Indonesian fires, 1997.

In 1997, Indonesian peat fires may have released 13%–40% as much carbon as fossil fuel burning does . Various techniques have been proposed for removing excess carbon dioxide from the atmosphere in carbon dioxide sinks. Not all the emitted CO₂ remains in the atmosphere; some is absorbed in the oceans or biosphere. The ratio of the emitted CO₂ to the increase in atmospheric CO₂ is known as the airborne fraction (Keeling et al., 1995); this varies for short-term averages but is typically 57% over longer (5 year) periods.

The Global Warming Theory (GWT) predicts that increased amounts of CO₂ in the atmosphere tend to enhance the greenhouse effect and thus contribute to global warming. The effect of combustion-produced carbon dioxide on climate is called the Callendar effect.

Variation in the past

CO₂ concentrations over the last 400,000 years

The most direct method for measuring atmospheric carbon dioxide concentrations for periods before direct sampling is to measure bubbles of air ( fluid or gas inclusions) trapped in the Antarctic or Greenland ice caps. The most widely accepted of such studies come from a variety of Antarctic cores and indicate that atmospheric CO₂ levels were about 260–280µL/L immediately before industrial emissions began and did not vary much from this level during the preceding 10,000 years.

The longest ice core record comes from East Antarctica, where ice has been sampled to an age of 800,000 years before the present . During this time, the atmospheric carbon dioxide concentration has varied between 180–210 µL/L during ice ages, increasing to 280–300 µL/L during warmer interglacials . The data can be accessed at http://www.ncdc.noaa.gov/paleo/icecore/antarctica/vostok/vostok_data.html.

Some studies have disputed the claim of stable CO₂ levels during the present interglacial (the last 10 kyr). Based on an analysis of fossil leaves, Wagner et al. argued that CO₂ levels during the period 7–10 kyr ago were significantly higher (~300 µL/L) and contained substantial variations that may be correlated to climate variations. Others have disputed such claims, suggesting they are more likely to reflect calibration problems than actual changes in CO₂. Relevant to this dispute is the observation that Greenland ice cores often report higher and more variable CO₂ values than similar measurements in Antarctica. However, the groups responsible for such measurements (e.g., Smith et al.) believe the variations in Greenland cores result from in situ decomposition of calcium carbonate dust found in the ice. When dust levels in Greenland cores are low, as they nearly always are in Antarctic cores, the researchers report good agreement between Antarctic and Greenland CO₂ measurements.

Changes in carbon dioxide during the Phanerozoic (the last 542 million years). The recent period is located on the left-hand side of the plot, and it appears that much of the last 550 million years has experienced carbon dioxide concentrations significantly higher than the present day.

On longer timescales, various proxy measurements have been used to attempt to determine atmospheric carbon dioxide levels millions of years in the past. These include boron and carbon isotope ratios in certain types of marine sediments, and the number of stomata observed on fossil plant leaves. While these measurements give much less precise estimates of carbon dioxide concentration than ice cores, there is evidence for very high CO₂ concentrations (>3,000 µL/L) between 600 and 400 Myr BP and between 200 and 150 Myr BP. On long timescales, atmospheric CO₂ content is determined by the balance among geochemical processes including organic carbon burial in sediments, silicate rock weathering, and vulcanism. The net effect of slight imbalances in the carbon cycle over tens to hundreds of millions of years has been to reduce atmospheric CO₂. The rates of these processes are extremely slow; hence they are of limited relevance to the atmospheric CO₂ response to emissions over the next hundred years. In more recent times, atmospheric CO₂ concentration continued to fall after about 60 Myr BP, and there is geochemical evidence that concentrations were <300 µL/L by about 20 Myr BP. Low CO₂ concentrations may have been the stimulus that favored the evolution of C4 plants, which increased greatly in abundance between 7 and 5 Myr BP. Although contemporary CO₂ concentrations were exceeded during earlier geological epochs, present carbon dioxide levels are likely higher now than at any time during the past 20 million years and at the same time lower than at any time in history if we look at time scales longer than 50 million years. NOAA research estimates that 97% of atmospheric CO2 created each year is from natural sources and approximately 3% is from human activities.

Capturing/Extracting CO₂

Methods of CO₂ extraction/separation include:

1. Aqueous solutions
   • Amine extraction
   • High pH solutions

   For example, Carbon Dioxide reacts with dissolved CaO, to form Calcite (CaCO₃)

2. Adsorption
   • Molecular Sieve
   • Activated Carbon www.netl.doe.gov (pdf file)
   • Metal-organic frameworks(MOF's)
3. Solid reactants
   • Serpentine, Olivine, Quicklime
4. Membrane gas separation
5. Regenerative Carbon Dioxide Removal System (RCRS)

   The RCRS on the space shuttle Orbiter uses a two-bed system that provides continuous removal of CO₂ without expendable products. Regenerable systems allow a shuttle mission a longer stay in space without having to replenish its sorbent canisters. Older lithium hydroxide (LiOH)-based systems, which are non-regenerable, are being replaced by regenerable metal-oxide-based systems. A metal-oxide-based system primarily consists of a metal oxide sorbent canister and a regenerator assembly. This system works by removing carbon dioxide using a sorbent material and then regenerating the sorbent material. The metal-oxide sorbent is regenerated by pumping air heated to around 400 °F at 7.5 scfm through its canister for 10 hours.

Oceans

Air-sea exchange of CO₂

The Earth's oceans contain a huge amount of carbon dioxide in the form of bicarbonate and carbonate ions—much more than the amount in the atmosphere. The bicarbonate is produced in reactions between rock, water, and carbon dioxide. One example is the dissolution of calcium carbonate:

CaCO₃ + CO₂ + H₂O ⇌ Ca²⁺ + 2 HCO₃^-

Reactions like this tend to buffer changes in atmospheric CO₂. Reactions between carbon dioxide and non-carbonate rocks also add bicarbonate to the seas, which can later undergo the reverse of the above reaction to form carbonate rocks, releasing half of the bicarbonate as CO₂. Over hundreds of millions of years this has produced huge quantities of carbonate rocks. If all the carbonate rocks in the earth's crust were to be converted back into carbon dioxide, the resulting carbon dioxide would weigh 40 times as much as the rest of the atmosphere.

The vast majority of CO₂ added to the atmosphere will eventually be absorbed by the oceans and become bicarbonate ion, but the process takes on the order of a hundred years because most seawater rarely comes near the surface.

History

Carbon dioxide was one of the first gases to be described as a substance distinct from air. In the seventeenth century, the Flemish chemist Jan Baptist van Helmont observed that when he burned charcoal in a closed vessel, the mass of the resulting ash was much less than that of the original charcoal. His interpretation was that the rest of the charcoal had been transmuted into an invisible substance he termed a "gas" or "wild spirit" (spiritus sylvestre).

Carbon dioxide's properties were studied more thoroughly in the 1750s by the Scottish physician Joseph Black. He found that limestone ( calcium carbonate) could be heated or treated with acids to yield a gas he termed "fixed air." He observed that the fixed air was denser than air and did not support either flame or animal life. He also found that it would, when bubbled through an aqueous solution of lime ( calcium hydroxide), precipitate calcium carbonate, and used this phenomenon to illustrate that carbon dioxide is produced by animal respiration and microbial fermentation. In 1772, Joseph Priestley used carbon dioxide produced from the action of sulfuric acid on limestone to prepare soda water, the first known instance of an artificially carbonated drink.

Carbon dioxide was first liquefied (at elevated pressures) in 1823 by Humphry Davy and Michael Faraday. The earliest description of solid carbon dioxide was given by Charles Thilorier, who in 1834 opened a pressurized container of liquid carbon dioxide, only to find that the cooling produced by the rapid evaporation of the liquid yielded a "snow" of solid CO₂.